Skip to main content

Most common shutter measurement errors to avoid

When planning the installation of exterior shutters, taking action is the first step. You need to make sure of the dimensions of your windows before buying anything. The measurement process shouldn't be difficult, especially when you know that it involves taking and recording the size of each window.

However, one thing that is for sure is that if you take the wrong measurement for your shutters, you will have to deal with a lot of problems. Incorrect measurements can occur even when you are interested. It is because there are many mistakes that individuals make during this process.

shutters installation issues

1. Do not record measurements

If you want to measure exterior shutters, always write your own figures. This situation usually occurs when you work alone. Sometimes you can assume that you can remember all the measurements and therefore do not have to record them. This approach can work when you only measure one window.

Even in such a situation, you can always forget about measurements, and this will bring a lot of trouble. Nothing can be as frustrating as when you walk into a store to buy shutters and find that you cannot remember the actual size. To avoid this problem, always have a pencil and paper to write down the measurements.

2. Estimation of size

Some people look into their windows and assume they will determine their scales when buying shutters. This trend is quite risky because you can never be sure what to buy. For example, anyone who has bought these items will tell you that they appear larger or smaller than their actual size.

If you try to estimate, you will end up with a situation that will be difficult to resolve. For example, when your shutters are small by just an inch, you can be sure they won't be useful unless you modify them.

3. Taking a measurement

Incorrect measurement of shutters can be the result of taking a single measurement. Some people assume that all the windows in their houses are the same size and therefore only measure one. Even when these windows appear to be the same size, you will be surprised to find that there are big differences.

A window can be up to two inches larger or smaller, and therefore a single shutter cannot fit all of them. Even when you're in a hurry, it's always worth taking every measure to be sure of everything.

plantation shutter wholesaler

4. Taking measurements from old shutter

Instead of measuring the particular size of the window, some people choose to go along with the heights of the old ones. Although they can sometimes be accurate, this is not always the case.

Old shutters may have suffered a lot of wear and tear and therefore may not be the same size as when you bought them. They can also be of a different design, so you have to go with the current.

5. Don't measure in three places

When taking window measurements, the width, as well as the height, should be done in three areas. You need to measure the top, middle and bottom of the frame. In addition to that, you should take vertical measurements to the left, right, and in the center.

When you do it this way, you will notice that some windows are not the same size in these three areas. Not recognizing this variation means that you may end up with items that fit on the top and bottom side, but not in the middle.

6. Using the wrong tape measure

What tape do you use to measure the shutters? Studies show that many people are not using the right tapes. There are those who use rulers, cloth tapes and other elements that do not give them the correct results. For example, a fabric tape that is stretched during the measurement process can lead to inaccurate results.

Experts in this industry recommend that a standard steel tape be used for this purpose. When measuring, make sure that no part of the entire length is bent because it is a sure way to get inaccurate measurements.

shutter systems

7. Ignoring the depth of your windows

It is common to see people focus on the width and height of their windows. They want to get the most accurate measurements of these parts because they believe they are the most critical aspects. What they fail to understand is that depth also matters.

You need to know how thick the windows are in order to buy the correct design. For example, you may want to know if the shutters will overlap the entire window or if they will accommodate depth. How will they open and close?

8. Mix of measures

In the book where you record your measurements, make sure to point everything. Draw a table showing all the windows and the figures for length, width, and depth. What usually happens in such a situation is that people take the right measures, but accidentally mix them up.

For example, if you take the length of one window and record it against the width of a different one, you will probably end up buying shutters that don't fit. To avoid this, you may also want to take full measurements for each window before moving on to the next.

As you can see, you need to be careful when you want to measure shutters. If you don't have an idea of what to measure, you may want to hire an expert. They will record each figure so that their task is to walk into a store and choose the correct sizes. In addition to helping with the measurement process, good contractors will also help with the installation. Choosing a reliable supplier will help you avoid the many mistakes that homeowners make.


Popular posts from this blog

Get the best results when painting a Colorbond® roof

Thinking of painting a Colorbond roof? While Colorbond is a strong roofing material, there may come a time when you want to give it another coat. If your Colorbond roof is discolored or peeling, or you've moved to a new home with a Colorbond roof, but the color is not to your liking, repainting is a cost-effective alternative to replacing the roof. A skilled roof painter can paint a Colorbond roof to restore it to its former glory or change it to your preferred color. Can you paint a Colorbond roof? Painting Colorbond roof sheeting can be done DIY if you have the experience, but it is generally best left to the professionals. Painting Colorbond steel requires proper prep work and uses a multi-layer coating system, so it is no different from repainting a motor vehicle and must be done with care. You must also use the correct paints. A skilled roof painter knows how to use Wattyl paints that are produced to exactly match the original Colorbond colors, so you can get a perfec


Investors are looking for new forms of investment, the behavior of the main Central Banks, the slowdown in China, the fall in metals, the sharp rise in stock markets, all of these are just reasons for investors to look for other investment alternatives For this reason I want to start the year by exposing the growing diamond market and how a common person can access this type of market. To begin with, we must know that Diamond investment is an allotrope of carbon, that is, it is a variation of carbon with a different molecular structure. Diamond has the highest hardness and thermal conductivity of all materials known to man. Most natural diamonds are formed under conditions of extreme pressure and temperature, existing at depths of 140 km to 190 km in the earth's mantle. Diamonds are brought close to the Earth's surface through deep volcanic eruptions by magma. Diamonds are valued according to 4 characteristics, which are called the 4C: 1- CUT (cut) The beauty of a cut diamond


The series " Better than us ", shown on Netflix, shows the relationship between men and robots in the indefinite future. In a particular episode, a person is greeted by his home with a greeting, followed by the lighting of lights in various environments. At the end of this process, the house management system offers to prepare a bath, but the person only asks for coffee to be served. Although the episode made no mention of air conditioning, it is certain that the temperature in the house was in accordance with the preferences of the resident. It all seems like a distant fiction. In what future will we have a house that welcomes us with everything the way we like it? The answer is simple, although it sounds like a novelty to many people: the smart home is already a reality. Home automation is responsible for bringing the future to the present. For most people, contact with home automation starts with a film. or reporting. We see a feature that looks magical and imagine it to